Graph Power Rigger — THE ULTIMATE 16-18 FT Console & Bow Electronics Wiring System for AVID FISHERMAN

 Graph Power Rigger is the full-boat, interference-free electronics wiring solution for 16–18 ft console boats. A 13 ft 8-gauge console backbone and a 10 ft 10-gauge bow backbone each provide four fused connections, so console graphs, bow graphs and forward-facing sonar each get dedicated, clean power.

Today's forward-facing sonar and multi-graph setups are sensitive to voltage drop and electrical noise. Connect-Ease clean-power wiring gives each device its own fused, dedicated circuit back to a clean 12V house battery — no shared trolling motor circuits and no piggy-backed ring terminals — so screens stay crisp, sonar stays quiet and units don't reboot under load.

Compatible electronics and accessories: Humminbird HELIX, SOLIX, APEX and MEGA Live 2; Garmin ECHOMAP UHD2, GPSMAP and LiveScope Plus / XR (GLS 10 black box); Lowrance HDS PRO, HDS Live, Elite FS and ActiveTarget 2; Raymarine Axiom and Element.

System voltage: 12V house battery (lithium compatible). Recommended batteries: Dedicated 12V house battery: 12.8V LiFePO4 (20–50Ah) recommended for forward-facing sonar; AGM also works. Up to 16V lithium supported where noted. Amperage and protection: 30A fuse at the battery; 3A or 5A fuse at each graph, transducer box or FFS black box as your electronics maker specifies.

The Graph Power Rigger IS THE ULTIMATE WIRING System FOR CLEAN, INTERFERENCE FREE  plug-and-play electronics wiring solution for 16–18 ft console boats. Provides dedicated, clean power to both console and bow electronics — eliminating the power and connection issues caused by shared wiring on today's sophisticated fishing rigs.

• Console Backbone: 13 ft of 8-gauge marine-grade sheathed wire with 4 fused connections
• Bow Backbone: 10 ft of 10-gauge marine-grade sheathed wire with 4 fused connections
• Design: Easy-feed integrated charging leads with plug-and-play connections throughout
• Compatibility: Designed for all major fresh- and saltwater marine electronics brands — Garmin, Lowrance, Humminbird, and others
• Lithium Compatible: Fully compatible with lithium battery systems
• Installation: No cutting, splicing, or soldering required

   

• Console backbone: 13 ft 8-gauge sheathed wire, 4 fused leads
• Bow backbone: 10 ft 10-gauge sheathed wire, 4 fused leads
• Easy-feed design with integrated charging leads
• Plug-and-play connections throughout
• Lithium compatible; no cutting, splicing or soldering

Compatible Fish Finder:

• Humminbird HELIX
• SOLIX
• APEX and MEGA Live 2
• Garmin ECHOMAP UHD2
• GPSMAP and LiveScope Plus / XR (GLS 10 black box)
• Lowrance HDS PRO
• HDS Live
• Elite FS and ActiveTarget 2
• Raymarine Axiom and Element

Recommended Voltage/ Amperage/ Fuse/ Breaker:

12V house battery (lithium compatible), 30A fuse at the battery; 3A or 5A fuse at each graph, transducer box or FFS black box as your electronics maker specifies

Battery Types:

Dedicated 12V house battery: 12.8V LiFePO4 (20–50Ah) recommended for forward-facing sonar; AGM also works. Up to 16V lithium supported where noted

FAQ: What's the difference from Graph Power Pro?

A: Rigger is sized for 16–18 ft boats (13 ft console / 10 ft bow). Pro is for 19–22 ft boats with longer 8-gauge backbones.

FAQ: How many devices can I run?

A: Up to eight — four at the console and four at the bow.

16-18 ft boat electronics wiring, console and bow fish finder wiring; mid-size boat electronics harness; fused electronics backbone